SWISSCI XPOL 脂质立方相试剂盒 XPOL Lipidic Cubic Phase Kit

发表于2022年10月31日由上海金畔生物科技有限公司

XPOL Lipidic Cubic Phase Kit

The new SWISSCI XPol LCP allows excellent crystal viewing for even the smallest of crystals, with uniform zero background when using cross polarised light. The SWISSCI XPol LCP was developed closely with the Protein Crystallisation Center of the University of Zurich. The center has many years of expertise in crystallizing membrane proteins. The XPol LCP kit has been specially formulated to improve performance versus standard LCP systems.

XPOL 脂质立方相试剂盒
新的 SWISSCI XPol LCP 即使是最小的晶体也能实现出色的晶体观察，在使用交叉偏振光时具有均匀的零背景。 SWISSCI XPol LCP 是与苏黎世大学蛋白质结晶中心密切合作开发的。该中心在结晶膜蛋白方面拥有多年的专业知识。 XPol LCP 套件经过专门配制，可提高与标准 LCP 系统相比的性能。

Description

About

The Hydrophobic (silanized) Glass Base comes in ANSI/SLAS 1-2004-Standard (SBS) format allowing for easy automation and high throughput screening. The Double Sided Pressure Adhesive, available in 60μm and 120μm, comes readily stuck to the Glass Base with space for barcode application. The Double Sided Pressure Adhesive has 96 holes
that are 7mm in diameter and have a 2.3μ volume in the 60μm version and 4.6μl volume for 120μm. The large diameter almost eliminates the occurrence of precipitation solution being pulled to the side, which can often happen with smaller diameter holes.

The SWISSCI XPol LCP comes as standard with 175μm Cover Glass. For the addition of UV/Flu, UV Cover Films are also available upon request at 40μm, 100μm or 200μm thickness.

Performance Benefits

• Uniform, zero background when using cross polarised light
• Excellent crystal viewing for even the smallest crystals
• SBS format for automation
• Hydrophobic (silanized) Glass Base
• 175μm Cover Glass
• Glass on glass
• UV Cover Films for UV/Flu available upon request
• Easy sealing with Swissci special Pressure Adhesive
• 7mm diameter wells with 2.3μl / 4.6μl volume
• 60μm version suitable for LCP-FRAP application
• High throughput
• Ready to use
• JANSi UVEX compatible
• Formulatrix Rock Imager compatible

描述

关于

疏水（硅烷化）玻璃底座采用 ANSI/SLAS 1-2004 标准 (SBS) 格式，可轻松实现自动化和高通量筛选。双面压力粘合剂有 60μm 和 120μm 两种，可轻松粘贴到玻璃底座上，并留有空间用于条码应用。双面压胶有96个孔
直径为 7 毫米，60 微米版本的体积为 2.3 微米，120 微米版本的体积为 4.6 微升。大直径几乎消除了沉淀溶液被拉到一边的情况，这通常发生在直径较小的孔中。

SWISSCI XPol LCP 标配 175μm 盖玻片。对于 UV/Flu 的添加，还可根据要求提供 40μm、100μm 或 200μm 厚度的 UV 覆盖膜。

性能优势

• 使用交叉偏振光时均匀、零背景
• 即使是最小的晶体也能观察到出色的晶体
• 用于自动化的 SBS 格式
• 疏水（硅烷化）玻璃基体
• 175μm 盖板玻璃
• 玻璃上的玻璃
• 可根据要求提供用于 UV/Flu 的 UV 覆盖膜
• 使用 Swissci 专用压力粘合剂轻松密封
• 7mm 直径孔，2.3μl / 4.6μl 体积
• 适用于 LCP-FRAP 应用的 60μm 版本
• 高吞吐量
• 可以用了
• JANSi UVEX 兼容
• 兼容Formulatrix Rock Imager

Order Information 订购信息

Item: XPol LCP 60μm 7mm
Codes: LCP-XPOL-60.7XPol LCP 120μm 7mm – Pack 10 – Code: LCP-XPOL-120.7
Details: Pack of 10

SWISSCI 悬滴板密封膜 Hanging Drop Round Seals

发表于2022年10月31日由上海金畔生物科技有限公司

SWISSCI 悬滴板密封膜 Hanging Drop Round Seals

Hanging Drop Round Seals

Facts

ANSI/SLAS 1-2004 Standard
96 wells
UV / Non-UVP Transmissible Polymer

Key Features

Accommodates 3 separate drops of protein
Fits standard 2 or 3-drop MRC plates
Choice of 100 or 40-micron UVP specialty polymer layer

悬垂圆形密封件
事实ANSI/SLAS 1-2004 标准
96口井
UV / 非 UVP 可透过聚合物
主要特点

容纳 3 滴单独的蛋白质
适合标准的 2 或 3 滴 MRC 板
可选择 100 或 40 微米 UVP 特种聚合物层

Description

About

The revolutionary SWISSCI Hanging Drop Crystallisation Plate Seal (UVOP / Non-UVP) comes ready to use with a dust-free protective coating and specialty polymer base. The Seals accommodate up to 3 separate drops of protein and fit the standard 2-drop or 3-drop MRC plates. The product has a 100 or 40-micron thin layer of UVP specialty polymer developed for compact drop creation and ability to shoot X-ray without any noticeable diffraction. The non-UVP seal comes in 100-micron layer.

The SWISSCI hanging drop seals can be run with individual drops in the 96 positions or 192 drop – or 288 drops.
The volume of the drop is typically between 50 and 100 nanolitres.
The seal covers sit directly over the microwell plate crystallization reagent wells and are closed with a long term resistant closing adhesive which is validated not to ingress into the sample – nor lead to seal corruption.

To remove an individual crystal the seal may be peeled back or simply cut out with a scalpel. The material is very thin although still remaining as a perfect evaporation barrier and can be sliced with a knife very easily.

The seals are produced in a class 100,000 cleanroom environment and guaranteed to be dust and scratch-free.
Optical quality is of the highest level available.
The seals are able to be used in the UV / Non-UVP range thus enabling the user to recognize salt – from protein crystals under the Ultra Violet light source microscope.

描述
关于

革命性的 SWISSCI 悬滴结晶板密封件（UVOP / 非 UVP）带有无尘保护涂层和特种聚合物底座，随时可用。 Seals 最多可容纳 3 滴单独的蛋白质，并适合标准的 2 滴或 3 滴 MRC 板。该产品具有 100 或 40 微米的 UVP 特种聚合物薄层，专为形成紧凑的液滴和发射 X 射线而没有任何明显衍射的能力而开发。非 UVP 密封层为 100 微米。

SWISSCI 悬滴式密封件可在 96 个位置或 192 滴或 288 滴上单独运行。
液滴的体积通常在 50 到 100 纳升之间。
密封盖直接位于微孔板结晶试剂孔上方，并用经验证不会进入样品中的长期抗性密封粘合剂封闭 – 也不会导致密封损坏。

要移除单个晶体，可以将封印剥离或简单地用手术刀切掉。这种材料非常薄，但仍然是完美的蒸发屏障，可以很容易地用刀切割。

密封件是在 100,000 级洁净室环境中生产的，保证防尘和无划痕。
光学质量是可用的最高水平。
密封件可用于 UV/非 UVP 范围，从而使用户能够在紫外光源显微镜下识别来自蛋白质晶体的盐分。

Order Information 订货信息

Item: Hanging Drop Plate Seal Round Well UVP / Non-UVP
Codes:
UVP: 100-Micron Seal: HDP-UVP-96T02 | 40 Micron Seal: HDP-UVP-96T03
Non-UVP 100-Micron Seal: HDP-PE-96T03

SWISSCI 脂质立方相筛选试剂盒 Lipidic Cubic Phase Screening Kit

发表于2022年10月30日由上海金畔生物科技有限公司

SWISSCI 脂质立方相筛选试剂盒 Lipidic Cubic Phase Screening Kit

Lipidic Cubic Phase Screening Kit

The Lipidic Cubic Phase Crystallisation (LCP) kit facilitates the automation and increased throughput of LCP crystallization set-ups. This novel system enables LCP screening to be performed accurately and with ease using manual or automated systems to complete the delivery of the solutions. Working with innovative scientists Professor Gebhard Schertler and Pat Edwards from the MRC Laboratory in Cambridge, Swissci AG developed a new system for setting up LCP screens.

脂质立方相筛选试剂盒
脂质立方相结晶 (LCP) 套件可促进 LCP 结晶设置的自动化并提高产量。这种新颖的系统使 LCP 筛选能够准确且轻松地使用手动或自动系统完成解决方案的交付。 Swissci AG 与剑桥 MRC 实验室的创新科学家 Gebhard Schertler 教授和 Pat Edwards 合作开发了一种用于设置 LCP 屏幕的新系统。

Description

About

The SWISSCI LCP kit ensures crystallography set-up is fast, cost-effective, and robotically adaptable. In addition, Ultra Violet light can be used with the glass / UVP polymers to visualize proteins without the light scattering associated with traditional polymeric solutions.

The LCP technique for crystallizing membrane proteins can be difficult and time-consuming to set up as it utilizes highly viscous lipid mesophases to reconstitute proteins. SWISSCI AG and MRC overcame these problems with the LCP kit. This product combines an easy to use sandwich system with dedicated coupling tapes and thin-film UVP cover plates. It conforms to ANSI/SLAS 1-2004-Standards and thus is perfect for modern automation applications where high throughput is required.

Advantages

Ready to use, the plate fits laboratory robotics and uses a SWISSCI unique polymer to ensure UV stabilizations is not compromised by polarization.
Easy sealing with dry tabbed adhesive tape exposure and thin UVP cover film. Included in the kit is a plate leveling device to ensure the cover perfectly adheres to the bottom LCP plate.
No cross-contamination and ANSI/SLAS 1-2004-Standard.
The Sandwich plate can be easily removed from the base plate when required – in-situ X-ray data collection and structure determination are then enabled.
The product comprises a 700-micron thick UVP base plate with a 100 micron top pressure adhesive that has a yellow ready to remove the cover sheet and a separate 100-micron UVP cover film with protective dust cover. The kit is completed with a SWISSCI plate-leveling device.
Maximum volume of drop 1.6 microlitres.

描述

关于

SWISSCI LCP 套件可确保晶体学设置快速、经济高效且具有机器人适应性。此外，紫外光可与玻璃/UVP 聚合物一起使用，以使蛋白质可视化，而不会产生与传统聚合物溶液相关的光散射。

用于结晶膜蛋白的 LCP 技术设置起来既困难又耗时，因为它利用高粘性脂质中间相来重组蛋白质。 SWISSCI AG 和 MRC 用 LCP 套件克服了这些问题。该产品将易于使用的夹层系统与专用耦合胶带和薄膜 UVP 盖板相结合。它符合 ANSI/SLAS 1-2004 标准，因此非常适合需要高吞吐量的现代自动化应用。

好处

该板可立即使用，适合实验室机器人，并使用 SWISSCI 独特的聚合物，以确保紫外线稳定性不会受到偏振的影响。
使用干燥的标签胶带曝光和薄的 UVP 覆盖膜轻松密封。套件中包括一个板调平装置，以确保盖子完美地粘附在底部 LCP 板上。
无交叉污染和 ANSI/SLAS 1-2004 标准。
需要时，可以轻松地将夹心板从底板上取下 – 然后启用原位 X 射线数据收集和结构确定。
该产品包括一个 700 微米厚的 UVP 基板和一个 100 微米的顶部压力粘合剂，该粘合剂具有黄色，可随时去除覆盖片和一个单独的 100 微米 UVP 覆盖膜，带有保护性防尘罩。该套件配有 SWISSCI 板调平装置。
最大液滴体积为 1.6 微升。

Order Information 订货信息

Item: Lipidic Cubic Phase (LCP) Screening Kit
Code: LCP96T-UVP70U
Details: Box of 20

CPS Products – CPS-上海金畔生物

发表于2022年10月30日由上海金畔生物科技有限公司

CPS Products – CPS-上海金畔生物

Product Categories
- All Categories
  - Unipucks
  - Crystallography at Room Temperature / Controlled Humidity
  - Puck Tools
  - Synchrotron Tools
  - SSRL Cassettes and Tools
  - Sample Mounts and Bases
  - Taylor Wharton and shipping accessories
  - Replacement parts
  - ALS Pucks

Showing 1–12 of 86 results

Unipucks

10 UNIVERSAL V-1 Pucks *Rainbow

$3,450.00

Unipucks

10 UNIVERSAL V1- PUCKS

$3,450.00

Sample Mounts and Bases

100 Chip Holder Pin Base

$350.00

SSRL Cassettes and Tools

100 Replacement Poly-carbonate Washers for Sample Storage Cassette

$99.75

SSRL Cassettes and Tools

100 Replacement Ring Magnets for Sample Storage Cassette

$115.50

Crystallography at Room Temperature / Controlled Humidity

120 SSRL Crystallization Plate Well Foam Inserts

$96.00

ALS Pucks

14 – ALS Puck

$4,042.50

Replacement parts

20 Replacement Magnets for Universal V1-Puck Cover

$25.20

Replacement parts

20 Replacement Poly-carbonate Washers for Universal V1-Puck Enclosure Cavities

$25.20

Replacement parts

20 Replacement Ring Magnets for Universal V1-Puck Enclosure

$25.20

Crystallography at Room Temperature / Controlled Humidity

20 SSRL Crystallization Plate Well Foam Inserts

$16.00

Crystallography at Room Temperature / Controlled Humidity

240 SSRL Crystallization Plate Well Foam Inserts

$192.00

Top 10 Best Pucks

Products

240 SSRL Crystallization Plate Well Foam Inserts $192.00
120 SSRL Crystallization Plate Well Foam Inserts $96.00
20 SSRL Crystallization Plate Well Foam Inserts $16.00
SSRL Crystallization Plate $537.50
Crystal Clear Tape $6.95

美国Crystal Positioning Systems（CPS）是专业的晶体设备生产商，有兼容SSRL和ALS机器人的样品槽、样品储存和转移用的工具、同步加速器相关工具等，还可根据客户的要求进行产品定制。
经典产品
CP-111-021 Universal V1- Puck 通用型圆盘样品槽
CP-111-022 Double Puck Loading Dewar with Lid 液氮箱
CP-111-026 Puck Wand Base Holder Tool 圆盘样品槽底座转移工具
CP-111-027Puck Dewar Loading Tool样品槽转移工具
CP-111-028 Puck Separator Tools (base removal platform and push tool)样品槽分离工具
CP-111-030Bent Cryo-Tong样品槽钳
CP-111-065One-Piece Shelved Puck Shipping Cane样品槽架
CP-111-049 CX100 Dry Shipper, with Canister & Shipping Case 液氮罐+运输箱
详情请咨询上海金畔生物科技有限公司或者访问官网查询获得。

All Categories – CPS-上海金畔生物

发表于2022年10月29日由上海金畔生物科技有限公司

Call Today 716-483-3276

Call Today 716-483-3276

Refine Your Search

ALS Pucks

9 Products

Crystallography at Room Temperature / Controlled Humidity

8 Products

Puck Tools

23 Products

Replacement parts

6 Products

Sample Mounts and Bases

11 Products

SSRL Cassettes and Tools

20 Products

Synchrotron Tools

5 Products

Taylor Wharton and shipping accessories

10 Products

Unipucks

12 Products

About Us – CPS-上海金畔生物

发表于2022年10月27日由上海金畔生物科技有限公司

Call Today 716-483-3276

Call Today 716-483-3276

who we are

Crystal Positioning Systems Is A Manufacture Of Crystallography Equipment And Tools Related To Sample Handling Storage And Transport At Cryogenic Temperatures And Controlled Humidity

ABOUT us

Crystal Positioning Systems specializes in the manufacture of Crystallography Equipment and Tools related to sample handling, storage and transport at cryogenic temperatures and controlled humidity. We offer customization of many of our production, including specific modification requests, as well as custom colors and engraving of Universal Pucks and ALS Pucks; (custom orders may require a setup fee). We also manufacture custom parts and mechanical assemblies. Please contact us for more information. We love to hear from you!

All of our products have been reviewed and approved for use by beamline scientists at the Stanford Synchrotron Radiation Lightsource (SSRL) at SLAC, the Advanced Light Source (ALS) at LBNL as well as other beamlines worldwide. Before your beatime, check with your local beamline scientist for product compatibility.

For more information on the robotic sample exchange system used at crystallography synchrotron beamlines worldwide, and the types of sample pins they use, see robosync: https://smb.slac.stanford.edu/facilities/hardware/SAM/robosync/

Contact – CPS-上海金畔生物

发表于2022年10月25日由上海金畔生物科技有限公司

Call Today 716-483-3276

Call Today 716-483-3276

Get in touch

Want to get in touch? We’d love to hear from you. Here’s how you can reach us…

Talk To Sales

Interested In Our Products?

716-483-3276

Customer Support

Sometimes You Need A Little Help. Don’t Worry, We’re Here For You.

Contact support

Ask a question

get in touch

Engineering Contact: Richard Howells, Jr.

Office: 716-483-3276

Mobile: 814-873-6872

Fax: 716-483-0018

E-mail:info@crystalpositioningsystems.com

Contact Us Today!

maps generator

WSL-1800 CytoWatcher,atto代理,atto活细胞研究

发表于2022年10月25日由上海金畔生物科技有限公司

WSL-1800 CytoWatcher is a compact digital microscope.

No stress to take space in laboratory and moisture resistant for setting in a CO2 incubator for time-lapse live cell imaging.

目的和应用
用于低倍率的亮场细胞成像。

体积小巧，不占空间。

可用于CO2培养箱，用于培养条件下的延时成像。

配备5M像素彩色CMOS相机。

连接多个单元可采集多个样品。

一个荧光成像模型已经出现。

产品目录
WSL-1800 CytoWatcher是一种配有500万像素彩色CMOS相机的数字显微镜。

只要用USB线连接到Windows电脑上，你就可以通过一个简单的操作捕捉并保存微观图像。

由于CytoWatcher是防潮的，它可以放在CO2培养箱中，在培养细胞时自动拍摄延时图像。

wSL-1800 CytoWatcher wSL-1800-B CytoWatcher FL

Camera 5M pixels color CMos camera

Resolution 2592 x 1944 pixels

Magnification 4x

Field of view 1.425 x 1.070 mm

Focusing Manual adjustment

Light source white LED (trans-illumination) white LED(trans-illumination)465 nm epi-blue LED(Side-illumination)

optical filter Excitation: 480 nm shorpass filterEmission:525/45 nm bandpass filter

Moisture resistant Usable in humidity 95%% RH(usable in a co: incubator)

control software lmagesaverT for Windows (ncluded as standard)Capture mode: Live / Time-lapse

File format 8 bit TIFF，BMP.JPEG, Color / MonochromeMovie file: avi,maximum 60 fps

pC connection uSB 3.0x 1 uSB 3.0 x 1,USB 2.0 (or 3.0) x 1

os Windows 10/8.1/ 7(64/ 32 bit)

Dimension 130 (Wx 180 (D)x 190 (H) mm 130 (Wx 180 (D)x 190 (H) mm

Weight 2.5 kg 2.7 kg

Power usB (bus powered)

code No. Description unit

3601800 wSL-1800 cytowatcher 1 set

3601803 wSL-1800-B CytoWatcher FL 1 set

3601809 uSB 3.0 extension cable 1 ea

2110030 Cs Analyzer version 4 for Windows 1 set

2140202 uP-x898MD SONY thermal printer 1 set

2140913 UPP-110HG printer paper,10 trolls/pk 1 set

AB-3000B Cellgraph,atto代理,atto活细胞研究

发表于2022年10月25日由上海金畔生物科技有限公司

AB-3000B Cellgraph

Bioluminescnece imaging system for living cell and tissues
Cellgraph is an imaging system to detect low-level light emission in a single living cell by using a highly sensitive EM-CCD camera.

活细胞和组织的生物发光成像系统
Cellgraph是一种利用高灵敏度EM-CCD相机检测单个活细胞低水平光发射的成像系统。

目的和应用

实时报告基因检测

转录因子活性，时钟基因(时间药理学)。基因表达(转染,RNAi等)

细胞反应分析

药物反应(抗癌药物，DDS等)，应激反应(激素，炎症，抗氧化)，细胞毒理学

信号通路分析

信号级联(钙)、细胞凋亡等

在35mm的培养皿上获得培养细胞或组织样本的图像。

通过控制温度、CO₂气体浓度和加湿，提供CO₂培养箱等效气氛。

EM-CCD相机对微弱生物发光的高度敏感和精确检测。

分离和捕获多色微弱生物发光。

操作简单，界面友好。

用专门的软件从PC上完全控制。

完全不透光，结构紧凑。

	AB-3000B Cellgraph
cooled ccD camera	ccD type:Back-illuminated EMCCD
	Active pixel: 512 x 512 pixel
	pixel size:16 x 16 um
	ADresolution 14 / 16 bit
cooling temperature	-8oC with an air-cooling system when the room temperature is 25c -90rc with a water-cooling system (optionalj
ccD camera water-cooling unit (optional	Constant-temperature water circulating system, heat-resistant tube for circulation
objective Lens	4x(NA 0.53)(Other magnification lenses are also available as optional accessories)
objective lens (optional)	2x,10 x,20 x,40x, 60 x
Stage	x-Y-z axis manual stage.Z-axis motorized stage
culture dish	35 mm culture dish
co: gas injection unit (optional)	cozgas-mixer
co:gas humidifying unit (optional	Bubbling system for gas humidification
Perfusion culture chamber unit (optional)	chamber for perfusion
Constant temperature function	(Room temperature -5C) to 45℃,0.1℃ step
Lighting	white LED with dimming function Blue LED with dimming function
optical filter	Up to three filters can be set (525LP/560 LP/ 620 LP are standard equipment)
Exposure time	30 milliseconds to 90 minutes
lmaging interval	Indefinite
Control software	os:Windows 7 / vista / xp
System requirement	RAM:1GB or more(512 MB or more for xP) Hard drive: 3oGB or more free disk space required lnterface: Full size Pc slot x 1, serial port x 1,uSB port x 1
power (main body)	AC100-240V 106VA (aries according to the components of the whole system)
Dimension	400 w x 450 (D)x 700 (H)mm
weight	Approx. 40 kg (Cellgraph main body only)

图像分析软件CS Analyzer 4/Windows 版,atto代理,atto化学发光成像系统

发表于2022年10月25日由上海金畔生物科技有限公司

图像分析软件CS Analyzer 4 （Windows 版）

目的和应用

电泳图谱数字化
分析结果保存和报告
图像转换保存

特征

LANE 分析（SDS-PAGE 凝胶、琼脂糖凝胶图像等）
SPOT 分析（蛋白质印迹等）
PLATE 分析（斑点印迹等）
管家蛋白质标准化
分子量标记校准
秤校准
图像模式转换
吸光度转换
合并RGB，图像处理
数据保存并汇总为报告
支持TIFF、BMP、JPEG、CCD（ATTO原始格式）

目的和应用

自由旋转功能
您无需一一输入角度。
只需将一条线拖到一条相同大小的带上即可自动调平它。

图像格式

・16位TIFF

・16/14/12bit CCD（ATTO原始格式）

・16/14/12bit Chain（ATTO原始格式）

・8bit TIFF/JPEG/BMP

自己的名字文件：另存为….

・16位TIFF

・8bit TIFF/JPEG/BMP

图像转换保存

调整16bit TIFF图像→8bit图像（TIFF・JPEG・BMP等）

将图像另存为….

语言选择

安装时选择英语或日语。

蛋白结晶试剂盒耗材工具

SWISSCI∣Rigaku∣Jena∣MiTeGen∣MD∣品牌蛋白结晶代理

月度归档：2022年10月

SWISSCI XPOL 脂质立方相试剂盒 XPOL Lipidic Cubic Phase Kit

XPOL Lipidic Cubic Phase Kit

SWISSCI 悬滴板密封膜 Hanging Drop Round Seals

Hanging Drop Round Seals

SWISSCI 脂质立方相筛选试剂盒 Lipidic Cubic Phase Screening Kit

Lipidic Cubic Phase Screening Kit

CPS Products – CPS-上海金畔生物