SWISSCI XPOL 脂质立方相试剂盒 XPOL Lipidic Cubic Phase Kit
XPOL Lipidic Cubic Phase Kit
The new SWISSCI XPol LCP allows excellent crystal viewing for even the smallest of crystals, with uniform zero background when using cross polarised light. The SWISSCI XPol LCP was developed closely with the Protein Crystallisation Center of the University of Zurich. The center has many years of expertise in crystallizing membrane proteins. The XPol LCP kit has been specially formulated to improve performance versus standard LCP systems.
XPOL 脂质立方相试剂盒
新的 SWISSCI XPol LCP 即使是最小的晶体也能实现出色的晶体观察，在使用交叉偏振光时具有均匀的零背景。 SWISSCI XPol LCP 是与苏黎世大学蛋白质结晶中心密切合作开发的。 该中心在结晶膜蛋白方面拥有多年的专业知识。 XPol LCP 套件经过专门配制，可提高与标准 LCP 系统相比的性能。
Description
About
The Hydrophobic (silanized) Glass Base comes in ANSI/SLAS 1-2004-Standard (SBS) format allowing for easy automation and high throughput screening. The Double Sided Pressure Adhesive, available in 60μm and 120μm, comes readily stuck to the Glass Base with space for barcode application. The Double Sided Pressure Adhesive has 96 holes
that are 7mm in diameter and have a 2.3μ volume in the 60μm version and 4.6μl volume for 120μm. The large diameter almost eliminates the occurrence of precipitation solution being pulled to the side, which can often happen with smaller diameter holes.
The SWISSCI XPol LCP comes as standard with 175μm Cover Glass. For the addition of UV/Flu, UV Cover Films are also available upon request at 40μm, 100μm or 200μm thickness.
Performance Benefits
• Uniform, zero background when using cross polarised light
• Excellent crystal viewing for even the smallest crystals
• SBS format for automation
• Hydrophobic (silanized) Glass Base
• 175μm Cover Glass
• Glass on glass
• UV Cover Films for UV/Flu available upon request
• Easy sealing with Swissci special Pressure Adhesive
• 7mm diameter wells with 2.3μl / 4.6μl volume
• 60μm version suitable for LCP-FRAP application
• High throughput
• Ready to use
• JANSi UVEX compatible
• Formulatrix Rock Imager compatible
描述
关于
疏水（硅烷化）玻璃底座采用 ANSI/SLAS 1-2004 标准 (SBS) 格式，可轻松实现自动化和高通量筛选。双面压力粘合剂有 60μm 和 120μm 两种，可轻松粘贴到玻璃底座上，并留有空间用于条码应用。双面压胶有96个孔
直径为 7 毫米，60 微米版本的体积为 2.3 微米，120 微米版本的体积为 4.6 微升。大直径几乎消除了沉淀溶液被拉到一边的情况，这通常发生在直径较小的孔中。
SWISSCI XPol LCP 标配 175μm 盖玻片。对于 UV/Flu 的添加，还可根据要求提供 40μm、100μm 或 200μm 厚度的 UV 覆盖膜。
性能优势
• 使用交叉偏振光时均匀、零背景
• 即使是最小的晶体也能观察到出色的晶体
• 用于自动化的 SBS 格式
• 疏水（硅烷化）玻璃基体
• 175μm 盖板玻璃
• 玻璃上的玻璃
• 可根据要求提供用于 UV/Flu 的 UV 覆盖膜
• 使用 Swissci 专用压力粘合剂轻松密封
• 7mm 直径孔，2.3μl / 4.6μl 体积
• 适用于 LCP-FRAP 应用的 60μm 版本
• 高吞吐量
• 可以用了
• JANSi UVEX 兼容
• 兼容Formulatrix Rock Imager
Order Information 订购信息
Item: XPol LCP 60μm 7mm
Codes: LCP-XPOL-60.7XPol LCP 120μm 7mm – Pack 10 – Code: LCP-XPOL-120.7
Details: Pack of 10
Related products
MRC Microbatch Under Oil Plate
Hanging Drop Round Seals
MRC Maxi 48 Well Plates
MRC 2 Lens Crystallisation Plate